Sub-Sahara Mining & Industrial Journal
Industrial Mining News World

Atlas Copco’s new high head pump series holds its head high

Atlas Copco is proud to unveil its innovative new PAC H pump series. Featuring a maximum head size of 150m, a maximum flow of up to 1200 m3/h and a solids handling capability of up to 89mm, these high head centrifugal pumps maximise uptime and extend product lifespan, delivering substantial savings on Operational Expenditure (OPEX) and lowest total cost of ownership to customers and end-users.

The PAC H pumps, which are part of Atlas Copco’s renowned Head series, are particularly suited to industrial applications such as water transfer and will benefit a wide range of industries including oil & gas, quarrying, surface mining and construction as well as the municipal sector.

“As there is a direct correlation between equipment availability and uptime and the speed in which service and maintenance work can be carried out, we have smartly centred the design of our PAC H pump series on simplified service and maintenance,” notes David Stanford, Business Line Manager for Atlas Copco Power Technique’s Portable Products. “In addition to the Atlas Copco brand of quality in materials and manufacture, these pumps are equipped with several features to facilitate the service and maintenance process, allowing for wear components to be serviced or replaced without the need to dismantle the pump. These include Atlas Copco’s hinge kit, semi-cartridge seal design, bolted wear plate and link belts. Our PAC H pumps even feature ergonomic internal lighting to optimise visibility during maintenance or repair work.”

The semi-cartridge seal allows for change-out without the need to dismantle the pump. It also makes the lip seal and impeller easily accessible. Stanford points out that cartridge seals which are normally an optional extra on other pumps in the market, are standard on the PAC H.

Atlas Copco’s innovative hinge kit includes a ‘swing door’ that allows quick and easy access to the pump’s internal workings and a single bolt to remove the impeller. Stanford explains that bolted wear rings make for precise and simple replacement compared to pressed alternatives. The fact that link belts are used to enable changeovers without having to dismantle the entire wet end of the unit reduces MTTR (mean time to repair) by up to 30%.

The pumps also feature an exclusive closed impeller which is equipped with deflector vanes that keep the mechanical seal clean and free of detritus. In addition to extending the mechanical seal life by up to three times longer, this unique hydraulic design eliminates the need to use flush water to keep the pump clean with subsequent significant energy and cost savings over the unit’s operational lifespan.

“These lean, clean and green fully EU Stage V compliant pumps feature a 120% fully leak-free structure,” notes Stanford. “The standard diaphragm vacuum pump has no carry-over of pump media and hence there is zero contamination from the pumps to its surroundings.”

The compact dimensions of these pumps means that they are up to 30% smaller than comparative pumps working on similar applications. In addition to increasing operational efficiencies, the compact size frees up valuable space; 10 units can be simultaneously transported on a 13m truck.

PAC H pumps embrace digital technology: A QR code on the unit can be scanned to conveniently obtain essential information on parts and spares; a PW controller series enables end-users to get the most out of the pumps in any application, while a transducer and floats make automatic operation possible. “The pumps boast complete engine management with alarms and fault shutdown capabilities,” says Stanford adding that end-users can also take advantage of the FleetLink connectivity, a remote monitoring feature that puts them in control of pumping operations.

Atlas Copco backs the PAC H, which are available in four models, with full after-sales support and readily available parts and spares. Product training is also available to customers and end-users to ensure correct operation for optimum pump performance, increased reliability and longer life span. With the addition of the PAC H series, Atlas Copco has boosted its extensive range of pumps, positioning the company as single source provider of world-class pump solutions to meet customers, end-users and specifiers’ pumping requirements.    / ends

Atlas Copco Group Great ideas accelerate innovation. At Atlas Copco we have been turning industrial ideas into business-critical benefits since 1873. By listening to our customers and knowing their needs, we deliver value and innovate with the future in mind.

Atlas Copco is based in Stockholm, Sweden with customers in more than 180 countries and about 37 000 employees. Revenues of BSEK 95/9 BEUR in 2018. For more information: www.atlascopcogroup.com

Power Technique
Great ideas accelerate innovation. At Atlas Copco Power Technique, we turn industrial ideas into leading edge technology in air, power and flow solutions. Our passionate people, expertise and service bring sustainable value to industries everywhere.

Portable Air is a division within Atlas Copco’s Power Technique business area. The division designs, manufactures and markets a comprehensive range of mobile and energy-efficient compressors, handheld light-demolition tools and industry focused solutions, such as high-pressure boosters and quality air equipment. The products are used in a wide range of industries including construction, mining, oil and gas, and rental. The divisional headquarters are located in Antwerp, Belgium. Principal product development and manufacturing units are located in Europe, Asia, South America and North America.

Power and Flow is a division within Atlas Copco’s Power Technique business area. The division designs, manufactures and markets a comprehensive range of mobile and energy-efficient generators, light towers, and pumps. Along with associated accessories and connectivity solutions. The products are used in a wide range of industries including construction, industrial, mining, dewatering, and rental. The divisional headquarters are located in Zaragoza, Spain. Principal product development and manufacturing units are located in Europe, Asia, South America and North America.

 

Issued by: Laverick Media Communications T: +27(0)79 949 1090 sonia@laverickmedia.co.za / www.laverickmedia.co.za

 

Related posts

GE Gas Power highlights role of gas & renewables in helping mining decarbonise

Editor

Reinforced materials are no longer a problem to recycle: the rebar can be quickly separated without hindering the job site

Editor

Boost uptime and productivity with SKF MultiPoint Automatic Lubricators

Editor

Leave a Comment